Pump Plunger Assemblies
Grainger Black Pipe Nipple Threaded 1x12 In
The Grainger Approved 1/2 in. Black Iron Pipe Nipple is made from seamless carbon steel pipe. It has National Pipe Thread ends that comply with ANSI standards. The nipple has a pressure rating of 850 psi at 70°F. It can be used in steam, air, gas, oil, and water applications. The nipple's working temperature range is -20° to 800°F. It measures 6 in. long and has an outside diameter of 0.840 in. The nipple weighs 0.22 lbs.
Grainger Black Pipe Nipple Threaded 1x2-1/2 In
The Grainger 14J805 is a 14-inch diameter, 8-inch deep plastic pail with a capacity of 5 gallons. It features a heavy-duty construction with a reinforced bottom and bail handle for portability. The pail is made from high density polyethylene and has a natural white color. It can be used for a variety of applications including mixing paints and chemicals, food processing, and collecting waste. The pail has gallon increments molded into the side for easy measurement. It meets FDA regulations for food contact.
BURKLE INC Thread adapter S 71x6 (DIN71) inner - G 2" inner,brown
This adapter is used when pumps need to be attached to containers such as drums or canisters with different thread standards.It is also suitable for laboratories, where experimental setups often require creative connections, as our adapters provide a secure and adaptable interface.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Footswitch for ON/OFF Pump Operation; DB9 Male Plug Type
A convenient accessory to make your job easier.
Waters Corp Plunger Assembly 700001532
Replacement Plunger Assembly. Constructed from sapphire and has a diameter of 0.280 inches. The sapphire plunger, which moves with the piston, fits into the pump head and fills the pump head with solvent (through the inlet check valve) when it retracts. The plunger expels the solvent from the pump head when it extends forward. It is recommended to change seals when changing plungers. Used on 2525/2535/2545 Pumps.
